Bituthene The original cold applied, nonhazardous, self-adhesive sheet membrane invented by
W.R. Grace in 1965. Its unique, proven qualities continue to protect major projects in
Australia and worldwide.

Bituthene It is a double barrier membrane consisting of tough, pliable, waterproof sheet which totally and fully adheres to the substrate thus preventing the movement of water between the membrane and the substrate. Bituthene will not become hard and brittle with age and will bridge shrinkage cracks.

Bituthene 2000 1.0mm thick x 1m wide 20m rolls

Moisture/vapour proof membrane for damp proofing flat decks.

Bituthene 3000 1.5mm thick x 1m wide 20m rolls

Waterproof membrane for basements, substructures and flat deck applications

Bituthene 6000 1.6mm thick x 1m wide 20m rolls

Tough, high performance membrane for critical substructures and civil engineering works

Bituthene Mastic Membrane and primer are also part of the above range.

Bituthene Mastic Membrane is a one-part high performance, fast curing, high solids, polyurethane rubber polymer. It is specifically formulated for use with all Bituthene and Preprufe sheet membrane applications

Preprufe Pre-applied membrane is the first truly blind side waterproofing system.

Preprufe 160 for vertical applications

Preprufe 300 or horizontal applications

Hydroflex A general purpose, one pack, non-hazardous bitumen modified synthetic rubber liquid membrane for basement walls, lift pits, planter boxes, box gutters, sill and window flashings, landscaped areas, water features, beam edges and as a general purpose damp proof sealant

Newflex W.A.M is a technically advanced, high performance one-part, water based, latex rubber polymer wet area membrane. It is specially designed for installation of waterproof membrane barriers where fast cure is required

Newflex R100 is a specially modified version of our unique water dispersed, liquid synthetic rubber membrane, containing linear micro fibre reinforcement. This membrane is specifically designed to eliminate blistering and wrinkling that may occur in exposed or ponded situations, as it does not require the general use of reinforcing fabrics.

Aquaguard M is an advanced, high performance, one-part, fast curing, high solids, polyurethane rubber polymer membrane. Aquaguard M is specially designed for the installation of high build waterproof membrane barriers.

Fastflex is a two component, polymer modified, flexible, cementitious waterproofing membrane. It is applied as a slurry on to horizontal and vertical surfaces of most building substrates to provide a breathable membrane which allows water vapour transmission but is impermeable to liquid water.

Protectoboard is a high impact resistant, UV stabilized thermoplastic sheeting. Its unique fluted design gives strength and provides excellent damage resistance. Used to prevent tanking and deck membranes against backfilling operations etc.

Contec C1 cement based waterproofing system for fixing damp and leaking structures. Concrete tanks, basements etc. Crystals grow back into the concrete structure even against the flow of water.

Resimax 290s for damp proofing injection and sealing porous substrates, pavers, block work etc.

Applied by brush roller or spray

Resimax 290s provides an effective barrier, but is invisible and therefore does not change the appearance of the substrate