Epoxy pastes and liquid resins for Industrial and Construction use.

Adhesive Pastes

Megapoxy adhesive pastes for patching and bonding a variety of materials from concrete to metals are available in a range of setting times to suit numerous applications,

Megapoxy P1 is a 2 part paste for bonding and patching concrete 60 minutes work time

Megapoxy PM for bonding concrete, natural stone, metals etc. 45 minutes work time

Megapoxy RMF as above but with shorter work time 10 minutes work time

Megapoxy PF super fast gap filling adhesive, 3 minutes work time

Megapoxy 69 all purpose clear gel - general adhesive 45 minutes work time

Megapoxy 36 fast set paste for Road Marking 3 minutes work time

Megapoxy HT for application on overhead, vertical or inclined surfaces. The Hydrophilic non-sag characteristics assist greatly in underwater applications. 30 minutes work time

Liquid Epoxies

Megapoxy H for grouting bolts into concrete, repairing cracks, repairing floors etc. 30 minute work time

Megapoxy 132 for laminating, tanks, boats etc. 30 minutes work time

Megapoxy MC , chemical resistant maintenance coating. 2hr work time

Megapoxy PF Liquid fast set epoxy general adhesive. 3 minutes work time

Megapoxy 34 for electrical cable jointing and encapsulation. 30 minutes work time

Megapoxy 206 is a two component hydrophilic epoxy grout, 30 minutes work time

Megapoxy 108 is a rapid set liquid epoxy binder for use in civil engineering applications where early development of high strength is essential. 8 minutes work time

Megapoxy 108/78 recommended for civil engineering applications at ambient temperatures down to –10°C. Megapoxy 108/78 and Megapoxy 131 cure to high strength products and have been used extensively for anchoring steel into concrete and as construction adhesives under cold conditions. 4 minutes work time at 20 degrees, 4.5 hours work time at -10 degrees.

Epoxy resins for special purpose applications are also available