Spill control kits & associated products
Waterguide for drilling porcelain tiles
A cost effective
and guaranteed method of treating rising damp in brick, stone and block
walls. Tri-Gel is a water based and water soluble thixotropic gel which
diffuses naturally into damp substrates and reacts to form a water repellent
silicone network.
This network is permeable to water vapour which means the walls can “breath”
and dry out naturally.
Injected using a cartridge gun, Tri-Gel eliminates the need for electric
pumps on site
No. 2 Paste is an integral water resisting admixture for concrete and
masonry, above or below ground.
It is recommended for use where coloured mortar or integral floor colours
are used.
Bond Coat for: Cement Render, Solid Plaster, Patching and Toppings. Improving toughness and adhesion of cement renders and solid plasters. Priming, Sealing and dust proofing interior concrete walls and floors
Resimax 290s is a low viscosity silane-siloxane system which penetrates deeply into porous substrates to allow for a bonded hydrophobic lining to the pores. This treatment significantly reduces absorption of the water and waterborne salts but still allows the passage of water vapour. The solution does not produce any discolouration of the substrate and has excellent resistance to weathering.
31 Phillips St. Ph. +61 8 8234 5033
Thebarton, SA. 5031 F. +61 8 8234 1251