Brush-On™ 40 - a softer version of our popular Brush-On 50 with an ultimate shore hardness of 40A. Brush-On™ 40 is more pliable and flexible than BO 50 but still offers excellent abrasion resistance and high tear strength. It has the convenience of a one-to-one mix ratio and is easy to mix and apply with a brush or spatula. Brush-On™ 40 paints onto vertical surfaces and will cure with negligible shrinkage to a durable rubber that performs and lasts in production.

Brush-On™ 40 is compatible with BO 50. You can apply 2 layers of BO 40 and back it up with 2 layers of BO 50. Brush-On™ 40 is suitable for production casting of wax, concrete, hard plasters and other materials. It is used for architectural restoration, reproducing sculpture and many other applications.

Brush-On™  50 & 60 - developed to offer superior tear strength and abrasion resistance. They offer a convenient one-to-one mix ratio by volume and give the user ample working time to apply the material - in the studio or right on the work site. With a creamy consistency, Brush-On™ 50 & 60 paint on easily to vertical surfaces. They will cure with negligible shrinkage to a durable rubber and will stand up to repeated casting of abrasive materials like concrete. 

Brush-On 35 - a softer, more flexible version for fragile/intricate detail work.

Liquid Plastic

Smooth-Cast™ 300 Series of liquid plastics are ultra-low viscosity casting resins that yield castings that are bright
white and virtually bubble free. Vacuum degassing is not necessary. They offer the convenience of a one to one mix
ratio (one part A to one part B by volume). The differences between them are pot life and demold time

Smooth-Cast™ 325, 326 & 327 ColorMatch™ are new fast-cast resins that were developed specifically for adding color
pigments and fillers to achieve true color representation or filler effect. The ColorMatch™ Series is formulated “color
neutral”. Small amounts of pigment will yield accurate, vivid colors from cured castings

TASK Plastics is a new generation of performance urethane casting resins that offer superior physical
properties compared to our popular Smooth-Cast line of general purpose casting resins.

Shell Shock™ FAST and Shell Shock™ SLOW are thixotropic plastics that self thicken when mixed and can be brushed onto a variety of surfaces or into rubber molds. When Parts A and B are mixed in proper proportion, material cures at room temperature with virtually no shrinkage to a hard, durable plastic that exhibits good compressive and flexural strength. Fully cured castings are rigid and can be sanded, primed and painted. Color effects are possible by adding SO-Strong Color Tints.

SMASH! Plastic is a new urethane liquid plastic designed to shatter/crumble on impact (“breakaway glass”).SMASH! is water clear and, once fully cured, shatters like glass. It can be cast solid in thin sections to make window panes or rotationally cast to form hollow bottles, jars or other glass-like objects to be used as breakable props for movie and stage productions

Release Agents

Universal Mold Release Agent is formulated especially for mold making and casting, and works well
with most liquid rubber and liquid plastic products. It will release mold rubbers (such as polyurethanes
and polysulfides) from properly prepared models.

EASE RELEASE 200 is an excellent general purpose release agent for making molds and
casting parts. This product will release polyurethane elastomers, epoxy resin, polyester resins,
RTV silicones, rubber, and thermoplastic polymers. EASE RELEASE 200 is effective on
aluminum, chrome, RTV silicone, epoxy, rubber, and steel molds.

IN & OUT  water soluble release agent will aid in releasing concrete or gypsum plaster
castings from Smooth-On rubber molds.