31 Phillips St. Ph. +61 8 8234 5033
Thebarton, S.A. 5031 F. +61 8 8234 1251
E. sales@resimax.com.au
Spill control kits & associated products
Waterguide for drilling porcelain tiles
Injection balloons placed on a precast panel ready for injection
Please click here for the Technical Bulletin for Megapoxy HX
Crack Injection Resin
RESIMAX CRACK INJECTION SYSTEM
Resimax crack injection balloons are designed to be used with Megapoxy H or HX epoxy resin to effect the economical and permanent structural repair of cracks in concrete structures.
Resimax injection balloon features provide the following advantages:
Balloon Concept -Provides a visual aid to the process of filling the crack. The balloon stays inflated when the crack is full.
Clear base - Allows accurate placement of the balloon; lets you see the crack and also lets you see the resin when it rises to the balloon. The base is designed to prevent adhesive blocking the aperture during placement.
Latex hose- Balloons out to 20mm. to keep pressure on the crack.
Tap connection- Ensures secure closure of the balloon after inflation and allows leakage free connection to a injection gun. Also allows taps further along the crack to be left open if desired.
Equipment required for successful injection is as follows:
1) A quantity of injection balloons
2) Injection Gun
3) Mixing cups and stirrers
4) Megapoxy PF paste (Megapoxy PM if a slower setting time is required)
5) Megapoxy H or Megapoxy HX liquid epoxy resin